Engineered Templates — Index

Engineered templates are Level-1 drawing templates that carry their own engineering: a plant model, generated control logic, an I/O schedule, an alarm schedule, a calculation sheet and a control philosophy — plus a workspace where the placed unit can be run.

Which simulation? The workspace's Simulate view is a client-side, PLC-style scan simulation of one placed unit, running in your browser. It is not the server-side biokinetic process simulation (ASM1/ASM2d/ASM3/ADM1, Takács clarifier) documented under Simulation.

Page	Description
Overview	What an engineered template is, how it differs from an ordinary template, which "simulation" this is, what ships today, and why you may not see them yet
Placing an Engineered Template	The drag, the Confirm key parameters step, and what happens on Place and generate
The Template Workspace	Opening the workspace, and all nine views — live schematic, Simulate, Control loops, Signals, Calculations, Documents, Parameters
Engineered Units	The seven seeded units, all published

The seven units

Unit	What it models
Wastewater Pumping Station	A wet well with submersible pumps on a common rising main
Flow Balancing Tank	A flow-equalisation vessel holding a controlled pass-forward
Aeration Blower Set	Blowers on a common air header to fine-bubble diffusers
Flow to Full Treatment Control	An inlet chamber holding the consented flow and spilling the rest
Storm Tank	Two-compartment storm storage returning at the spare capacity upstream
Chemical Dosing	Bulk storage and duty/standby metering pumps dosing a purchased chemical
Storm Overflow Chamber	Fixed throttle, derived weir crest and powered screen on a combined sewer

Related

Topic	Page
Ordinary (geometry-only) drawing templates	Drawing Templates Overview
Authoring template code	Template Language Reference
Server-side biokinetic process simulation	Simulation Overview
The P&ID editor these units are placed on	Drawing